Material Data Safety Sheet
D3369A CLEAR

Version number 1.0

Print Date 08/05/2010

1. PRODUCT AND COMPANY IDENTIFICATION

QUALITY COATING COMPANY
2955 N. Main Street Princeton, IL. 61356

Telephone: Product Stewardship 770-590-3500 x3563

Emergency telephone number: CHEMTREC 1-800-424-9300 (24 hrs for spill, leak, fire, exposure or accident)

Product Name: D3369A Clear
Product Code: FO20019704EV
Chemical Name: Mixture
CAS-No.: Mixture
Product Use: Industrial Applications

2. COMPOSITION/INFORMATION ON REGULATED INGREDIENTS

There are no known hazardous components above regulatory thresholds in the product

3. HAZARDS IDENTIFICATION

Emergency Overview

This mixture has not been evaluated as a whole for health effects. Information provided for health effects of this product is based on the individual components. However, some vapors or contaminates may be released upon heating and the end-user (fabricator) must take necessary precautions (mechanical ventilation, respiratory protection, etc.) to protect employees from exposure. See sections 8 and 11 for special precautions.

Potential Health Effects

Routes of Exposure: Inhalation, Skin contact, Indigestion

Acute Exposure

Inhalation: Inhalation of airborne droplets may cause irritation of the respiratory tract

Ingestion: May be harmful if swallowed

Eyes: May cause eye/skin irritation

Skin: Experience shows no unusual dermatitis hazard from routine handling

Chronic exposure: Refer to section 11 for Toxicological Information

Medical Conditions Aggravated by Exposure: None known

4. FIRST AID MEASURES

Inhalation: Move to fresh air in case of accidental inhalation of fumes from overheating or combustion. When symptoms persist or in all cases of doubt seek medical attention.

Ingestion: Do not induce vomiting without medical advice. When symptoms persist or in all cases of doubt seek medical attention.

Eyes: Rinse immediately with plenty of water for at least 15 minutes. If eye irritation persists, seek medical attention.

Skin: Wash off with soap and plenty of water. If skin irritation persists see medical attention.

5. FIRE FIGHTING MEASURES

Flash Point:No data available

Flammable Limits
Upper explosion limits: No data available
Lower explosion limits: No data available
Autoignition temperature: Not applicable
Suitable extinguishing media: Carbon Dioxide blanket, Water spray, Dry powder, Foam.

Special Fire Fighting: Full face self-contained breathing apparatus (SCBA) used in positive pressure mode should be worn to prevent inhalation of airborne contaminates.

Unusual Fire/Explosion: May emit Hydrogen Chloride (HCL) or Carbon Monoxide (CO) under fire conditions. Carbon Dioxide (CO2), Carbon Monoxide (CO), Oxides of Nitrogen (NOx), other hazardous materials, and smoke are all possible.

6. ACCIDENTAL RELEASE MEASURES

Personal precautions: Wear appropriate personal protection during cleanup, such as impervious gloves, boots, and coveralls.

Environmental precautions: The product should not be allowed to enter drains, water courses or the soil. It should not be released into the environment.

Methods of cleaning up: Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Package all material in appropriate container for disposal. Refer to Section 13 of this MSDS for proper disposal methods.

7. HANDLING AND STORAGE

Handling: Heat only in areas with the appropriate exhaust ventilation. Processing fume condensates may contain combustible or toxic residue. Periodically clean hoods, ducts, and other surfaces to minimize accumulation of these materials.

Storage: Keep containers dry and tightly closed to avoid moisture absorption and contamination. Store in a cool dry place.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Respiratory protection: No personal respiratory protective equipment normally required.

Eye/Face protection: Safety Glasses with side shields.

Hand protection: Protective gloves

Skin and body protection: Long sleeved clothing

Additional Protective Measures: Safety shoes

General Hygiene Considerations: Handle in accordance with good industrial hygiene and safety practices. Wash hands before breaks and at the end of the work day.

Engineering Measures: Heat only in areas with appropriate exhaust ventilation. Provide appropriate exhaust ventilation at machinery.

Exposure Limit(s): There are no known hazardous components above regulatory thresholds in this product.

9. PHYSICAL AND CHEMICAL PROPERTIES

Form: Liquid
Evaporation rate: Not established
Appearance: Viscous, liquid
Specific gravity: Not determined
Color: NO PIGMENT
Bulk density: Not applicable
Odor: Very faint
Vapor pressure: Not determined
Melting point/range: Not applicable
Vapor Density: Not determined
Boiling Point: Not applicable
pH: Not applicable
Water solubility: Immiscible

10. STABILITY AND REACTIVITY

Stability: Stable

Hazardous Polymerization: Will not occur.

Conditions to avoid: Keep away from oxidizing agents and open flame. To avoid thermal decomposition, do not over heat

Incompatible Material: Incompatible with strong acids and oxidizing agents. Avoid contact with acetal homopolymers and acetal co polymers during processing

Hazardous decomposition: Carbon dioxide (CO2), carbon monoxide (CO), oxides of nitrogen
Products (NOx), hydrogen chloride (HCI), other hazardous materials, and smoke are all possible. Prolonged heating may result in product degradation. As a general rule of thumb, degradation begins to occur after 1 hour at 177°C (350°F), after 10 minutes at 204° C (400°F), and within 5 minutes at 232°C (450° F).

11. TOXICOLOGICAL INFORMATION

There are no known hazardous components above regulatory thresholds in this product

12. ECOLOGICAL INFORMATION

Persistence and degradability: Not readily biodegradable.

Environmental Toxicity: Environmental toxicity has not been established for this mixture as a whole.

Bioaccumulation Potential: No data available

Additional advice: No data available

13. DISPOSAL CONSIDERATIONS

Product: Where ever possible recycling is preferred to disposal or incineration. The generator of waste material has the responsibility for proper waste classification, transportation and disposal in accordance with applicable federal, state/ provincial and local regulations.

Contaminated packaging: Recycling is preferred when possible. The generator of waste material has the responsibility for proper waste classification, transportation and disposable in accordance with the applicable federal, state/ provincial and local regulations.

14. TRANSPORT INFORMATION

U.S. DOT Classification: Refer to specific regulation.

ICAO/IATA (air): Refer to specific regulation.

IMO/IMDG (maritime): Refer to specific regulation.

15. REGULATORY INFORMATION

U.S. Regulations:

OSHA Status: There are no known hazardous components above regulatory thresholds in this product.

TSCA Status: All components of this product are listed on or exempt from the TSCA inventory.

U.S. EPA CERCLA Hazardous Substances (40 CFR 302): Not applicable

California Proposition 65: Not applicable

SARA Title III Section 302 Extremely Hazardous Substance: Unless specific chemicals are identified under this section, this product is Not Applicable under this regulation.

SARA Title III Section 313 Toxic Chemicals: Unless specific chemicals are identified under this section, this product is Not Applicable under this regulation.

Canadian Regulations: National Pollutant Release Inventory (NPRI)

Chemical Name CAS-No. Weight% NPRI ID#
Miscellaneous Zinc Compounds Not available 0.10-1.00 241

WHMIS Classification: Not controlled

DSL: All components of this product are on the Canadian Domestic Substances List (DSL) or are exempt.

National Inventories:

Australia AICS: Not determined

China IECS: Not determined

Europe EINECS: Not determined

Japan ENCS Not determined

Korea KECI: Not determined

Philippines PICCS: Not determined

16. OTHER INFORMATION

The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of this publication. The information given is designed only as guidance for safe handling, use, processing, storage, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.